|
Accessories
|
| |
Additional Links
Quickly and easily add length to any Roll-A-Ramp® in 1 foot increments,
using the tools provided with the ramp. Sections are completely assembled ready to put on. Your ramp never becomes
obsolete & is a lifetime system. Use with Positive Lock PinsTM to quickly separate ramp into small sections.
| # 31122 |
|
1 foot of 12" Links sold as pairs |
| # 31262 |
|
1 foot of 26" Links |
| # 31302 |
|
1 foot of 30" Links |
|
| |
|
| |
Positive Lock Pins
Positive Lock PinsTM can be used to replace the special bolts holding all Roll-A-Ramp® links together.
Simply put any place there is a yellow cover. Recommended with any ramp length, popular also for home modular systems.
Simply separate off a short piece of the ramp for use as a portable ramp, then quickly put back on making it a
full system again! The easily removed pins allow any Roll-A-Ramp® to fit your exact needs.
# 3250 Positive Lock Pins sold as each |
| |
|
| |
|
|
|
Center Support Stands
Recommended for ramp lengths over 12 feet. Easily mounted to the
side rails from underneath, they add stability to your Roll-A-Ramp® when a longer ramp is needed or required.
Simply lift ramp from lower base of stand leaving upper piece attached for portability. Ramp can still be rolled
up.
# 3612 Center Support Stands |
|
|
|
| |
|
| |
Seg Mount Brackets
This pair of brackets allow for easy mounting to any landing surface.
The ramp's approach plate simply slips in & removes in seconds. Brackets not necessary for all applications
& are optional. Using these your ramp can be installed to be level with the surface of your landing.
# 3150 Seg Mount Bracket |
| |
|
| |
Pickup Tailgate Brackets
Brackets easily rivet or screw to tailgate, any surface where you
need a little extra holding power. Popular for loading into pickups. Low profile does not interfere with normal
use.
Pickup Tailgate Brackets hold ramp securely in place on any surface.
# 3415 Pickup Tailgate Bracket |
| |
|
| |
Approach Plates
Order extra plates for when you want to separate a ramp into shorter
sections. This allows you to have 2 or more complete ramp systems. Longer home modular systems can have a short
piece removed for a portable ramp, and then put back on to once again have a full system.
| # A45237-12 |
|
12" pair of Approach Plates |
| # A45237-26 |
|
26" Approach Plate |
| # A45237-30 |
|
30" Approach Plate |
|
| |
|
| |
Low Van Entry Plate
These special approach plates replace the standard ones, are load
bearing and designed for use when you need to place the end of the ramp directly on the landing surface; threshold,
van sill, etc. Helps to maximize the usable ramp length and also give the most clearance for vans. |
|
|
| |
|
| |
| # 3212 |
|
12" pair of Low Van Entry Plates |
| # 3226 |
|
26" Low Van Entry Plates |
| # 3235 |
|
30" Low Van Entry Plates |
|
|
| |
|
| |
|
|
|
26" Approach Plate for a 30" Ramp
Load bearing upper Approach Plate replacement allows a 30" Roll-A-Ramp®
to fit a 26" opening. The safety fence guides the chair through the door.
# 3220 26" Approach Plate for 30" ramps |
|
| |
|
Manual Bi-Fold Systems
No conversions or vehicle modifications needed. May use your existing
vehicle. Easily operated economical alternative to conversions. Complete system includes mounting bracket, ramp
and wheeled lower entry plate. Ramp easily removes for use as a portable ramp.
#AFM Full Size Manual Bi-Fold System 30"
#MFM Mini-Van Manual Bi-Fold System 26" |
| |
|
|
|
| |
|
| |
12" Universal Van Mount Brackets
Used for mounting the 12" Roll-A-Ramp pair set into the side
door of most vans. Brackets bolt to floor, and ramps may be quickly removed with the Positive Lock Pins® inlcuded.
| Order |
# 3224 (Universal) |
| |
# 3124 (Full-Size Van) |
|
| |
|
| |
Spacers
Spacers are used with the 12" pair. Spacers provide security
by getting the ramp width the same. Spacers easily snap into place on the ramp's safety rails.
The spacers are sold as each
|
| # 3380 |
|
8" wide spacer |
| # 3350 |
|
5" wide spacer |
| # 3320 |
|
2" wide spacer |
|
| |
|
| |
|
|
|
The Roll-A-Ramp® design easily supports itself on its edge while you
roll it up.
You do not need to hold or balance the ramp as you get it ready to be placed or put into storage!
No other portable ramp is as easy to handle. |
|
|
|
| |
Interested?
Are you interested in finding out more about Roll-A-Ramp? Contact us
to find out more! |
| |
